Best Practices

ACNIS International

Precision for Titanium – When Every Cut Must Be Perfect

MEBA Arrow

Best Practices

ACNIS International

Precision for Titanium – When Every Cut Must Be Perfect

MEBA Arrow
MEBA divider small

CUSTOMER PROFILE

CUSTOMER PROFILE

ACNIS International is considered one of the world’s largest titanium distributors. Through its subsidiary Aerometals & Alloys, the French company has been supplying the aerospace, medical, and high-tech industries for years —sectors in which quality, surface finish, and dimensional accuracy determine whether a component is approved for use. Whether it’s an aircraft structure, an implant, or a precision component: errors here are not only costly but, in many cases, simply unacceptable.

Background & Challenge

Background & Challenge

Titanium is lightweight, strong, and corrosion-resistant—but it is also expensive, difficult to machine, and highly flammable as a cutting material. Even the slightest deviations during sawing lead to material loss or scrap. ACNIS therefore could not afford to make any compromises when it came to cutting technology. Alexandre Mille, who is responsible for infrastructure investments at ACNIS, sums it up:

“Every cut must be perfect, both in terms of dimensional accuracy and surface quality.”

MEBA divider small

OBJECTIVE

OBJECTIVE

Reliable, high-precision cutting technology for a sensitive, valuable material

Maximum material utilization through minimal scrap lengths

Uncompromising availability and stability in multi-shift operations

Automation to Reduce the Workload on Staff and Increase Productivity

MEBA divider small

IMPLEMENTATION

IMPLEMENTATION

Decision-making process

ACNIS and MEBA developed the solution together during an intensive preparatory phase. It was only after extensive sawing tests yielded convincing results that the decision in favor of MEBA was made.

Alexandre Mille: “We chose MEBA saws because the company had demonstrated in advance, through sawing tests, that we can rely on MEBA machines and that their availability is 100 percent.”

For machines used in series production, close coordination with MEBA’s sales and project team—supported by the French partner P&G—was crucial.

Service

MEBA service technicians answer about 80% of all questions via remote diagnosis using online access to the machines. In a multi-shift operation, several maintenance sessions are performed each year; refresher training and additional sawing tests continuously improve sawing performance.

The Machinery Fleet

Today, ACNIS has two MEBAmat 434s, one MEBApro 300 A with a robot interface, and one MEBA 410 DGA-1300 in continuous operation—additional MEBA machines for international locations are either in the planning stages or already being implemented.

MEBAmat 434

13 hours a day on a rotating shift schedule

  • Fully Automatic Double-Mitre Band Saw
  • Vibration-damping cast iron frame
  • Automatic material feed system
  • Servo-controlled feed regulation and intelligent cutting pressure control
  • Triple clamping system: secures the material on both sides of the saw and prevents even the slightest movement

The result is perfect cut surfaces with a residual piece length of just 20 mm.

MEBApro 300 A with robot

5 to 7 hours a day

  • A robot removes sawn titanium bars up to 100 mm in diameter and palletizes the 10- to 25-mm-thick discs
  • Automatic material recognition
  • Optimization of scrap pieces
MEBA 410 DGA-1300

For large formats

  • Solid titanium blocks and large profiles up to approx. 1,300 mm
  • Precise feed control
  • Automatic material feed system
  • Robust construction for clean surfaces even with challenging materials
MEBA divider small

RESULTS

RESULTS

  • 100% machine availability, confirmed by sawing tests conducted prior to the investment decision

  • A scrap length of just 20 mm with the MEBAmat 434—a critical factor when working with a material as valuable as titanium
  • 24/7 operation of the robotic cell with no downtime and a consistent level of performance
  • 80% of service requests can be resolved via remote diagnostics
  • Significantly increased productivity thanks to the combination of the MEBA saw and the robot

MEBA divider small

CUSTOMER TESTIMONIALS

CUSTOMER TESTIMONIALS

“We chose MEBA saws because the company demonstrated in advance, through sawing tests, that we can rely on MEBA machines and that their availability is 100 percent.”

— Alexandre Mille and members of the ACNIS team

“This is ideal, especially for our mass-production runs. Less waste, precise cuts—that’s exactly what we need.”

“The combination of the MEBA saw and the robot has significantly increased our productivity. The system operates with precision, speed, and safety—even when working with a material as delicate as titanium.”

“We cut high-performance materials every day, and MEBA supplies us with the high-performance tools we need to do so.”

Conclusion

With the MEBA saws, ACNIS has found a solution that perfectly aligns with its philosophy: maximum quality with minimal material usage. From impressive sawing performance and high process reliability to efficient automation, it’s clear that MEBA machines are tailored to the unique challenges of titanium.

MEBA Separator Contact

next step

Request a no-obligation consultation now to find the right cutting solution for high-quality and challenging materials!